EN 62262 IK code table
| IK code | IK00 | IK01 | IK02 | IK03 | IK04 | IK05 | IK06 | IK07 | IK08 | IK09 | IK10 | IK11 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Impact energy (Joule) | * | 0.14 | 0.20 | 0.35 | 0.50 | 0.70 | 1.00 | 2.00 | 5.00 | 10.00 | 20.00 | 50.00 |
How to do an IK test
In the IK test, an impact element is dropped from a well-defined height with a defined weight and shape onto the test site.
IMPORTANT
The EN 62262 standard only specifies the level of impact energy, with the procedure and conditions for the test procedures detailed in standard EN60068-2-75. The following table is NOT in standard EN 62262, but in standard EN60068-2-75.
EN 60068-2-75 Dimensions table of impact elements
| IK code | IK00 | IK01 | IK02 | IK03 | IK04 | IK05 | IK06 | IK07 | IK08 | IK09 | IK10 | IK11 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Impact energy (Joule) | * | 0.14 | 0.20 | 0.35 | 0.50 | 0.70 | 1.00 | 2.00 | 5.00 | 10.00 | 20.00 | 50.00 |
| Drop Heigth (mm) | * | 56 | 80 | 140 | 200 | 280 | 400 | 400 | 300 | 200 | 400 | 500 |
| Mass (kg) | * | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.50 | 1.70 | 5.00 | 5.00 | 10.00 |
| Material | * | P1 | P1 | P1 | P1 | P1 | P1 | S2 | S2 | S2 | S2 | S2 |
| R (mm) | * | 10 | 10 | 10 | 10 | 10 | 10 | 25 | 25 | 50 | 50 | 50 |
| D (mm) | * | 18.5 | 18.5 | 18.5 | 18.5 | 18.5 | 18.5 | 35 | 60 | 80 | 100 | 125 |
| f (mm) | * | 6.2 | 6.2 | 6.2 | 6.2 | 6.2 | 6.2 | 7 | 10 | 20 | 20 | 25 |
| r (mm) | * | – | – | – | – | – | – | – | 6 | – | 10 | 17 |
| l (mm) | * | Must be adapted to the appropriate mass | ||||||||||
| Swing hammer | * | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Spring hammer | * | Yes | Yes | Yes | Yes | Yes | Yes | No | No | No | No | No |
| Free fall hammer | * | No | No | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
* not protected according to the standard
1.Polyamide 85 ≤ HRR ≤100 Rockwell hardness according to ISO 2039/2
2.Steel Fe 490-2 acccording to ISO 1052, Rockwell hardness HRE 80...85 according to ISO 6508
Exponentially increasing requirement
From IK class IK07, the energy gain per level increases by more than 100%. The exponential increase in impact resistance makes the demands on glasses particularly high and places maximum demands on the material and the integration method. Especially in the extremely robust area of IK10 and IK11, where the impact energy ranges from 20 to 50 joules, every detail counts. The correct integration of the glass for optimal impact resistance is an important prerequisite. We offer you proven integration methods at minimal cost.
Impact energy increase IK test
| IK classification | Impact energy (J) | Energy gain (%) |
|---|---|---|
| IK00 | 0.00 | |
| IK01 | 0.14 | |
| IK02 | 0.20 | 42.86 % |
| IK03 | 0.35 | 75.00 % |
| IK04 | 0.50 | 42.86 % |
| IK05 | 0.70 | 40.00 % |
| IK06 | 1.00 | 42.86 % |
| IK07 | 2.00 | 100.00 % |
| IK08 | 5.00 | 150.00 % |
| IK09 | 10.00 | 100.00 % |
| IK10 | 20.00 | 100.00 % |
| IK11 | 50.00 | 150.00 % |
Which IK code to choose
Basically, as little as possible but as much as necessary, but often the problems are more complex than the mere fulfilment of a norm.
The key question is what else do you want to achieve?
- Ensure competitive advantage in invitations for tender
- Increase resilience
- Improve product lifespan
- Improve brand image
- Present technology dominance
We will gladly assist you in resolving these issues and quickly and competently provide you with a cost-benefit analysis.
IK impact energy increase
What is a joule?
A Joule is a physical unit of energy. In the IK test, you calculate the impact energy by multiplying the height of fall with the weight of the impact element and the number 10.
Impact energy (W) = fall height (h) * weight (m) * 10
Calculation example: 1.00 m drop height * 1.00 kg mass impact element * 10 = 10 joules impact energy 0.50 m drop height * 2.00 kg mass impact element * 10 = 10 joules impact energy
This calculation is not 100% correct, but is a good and fast approximation.
EN 60068-2-75 drop heights
| Energy J | 0,14 | 0,2 | 0,35 | 0,5 | 0,7 | 1 | 2 | 5 | 10 | 20 | 50 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Total mass kg | 0,25 | 0,25 | 0,25 | 0,25 | 0,25 | 0,25 | 0,5 | 1,7 | 5 | 5 | 10 |
| Drop height mm ± 1% | 56 | 80 | 140 | 200 | 280 | 400 | 400 | 300 | 200 | 400 | 500 |
Development and services for special glass
We are specialists in glass solutions and offer you all the important services required for a fast development cycle and reliable series production. We advise you reliably, develop proven glass products and produce prototypes as well as large-scale production.
Our range of services includes:
- Performing qualifying impact tests
- Taking over the integration development
- Adhering to your housing
- Creating cost-benefit analyses
- Testing according to your specifications
- Developing test specifications
- Advice on materials and technology
- Offering qualified industrial-grade materials
- Building prototypes and small-scale production
